Starlink installers in Knutsford need to consider the building that will carry the equipment as well as the available sky view. This SpaceTek project illustrates a pole supported from a brick gable, with the dish held above the sloping roof edge.

What the Knutsford project shows
Two brackets support the vertical pole against the gable. The dish sits at its top, and the cable follows the pole down towards the wall. The arrangement provides separation from the roof edge without placing the base of the dish directly on the tiles.
The image is a useful example of geometry, not a specification for every house. It cannot show the condition of each fixing, the material behind the wall or the complete surrounding view. Those points need assessing before the same style of mount is considered elsewhere.
Another Knutsford project: keeping the support discreet
The April 2025 video below documents a separate Knutsford installation from the gable-pole photograph above. Bob explains that the customer wanted to avoid a conspicuous large pole, so the Generation 3 dish was fitted on a lower galvanised bracket with a pole adaptor. It illustrates a different decision within the same area: appearance was part of the mounting brief.
A discreet position must still provide the required sky view and suitable access. Tell us whether the installation will be visible from a principal window, garden seating area or entrance, and which wall finishes should be avoided. We can then compare feasible positions rather than assuming the tallest support is the best choice.
YouTube loads only when you choose to play and allow its cookies.
Agree the support before buying accessories
A kit model, suitable adapter, pole and wall brackets need to work together. If you already own equipment, send a photograph of its label and any mount you hope to reuse. Avoid ordering a bracket solely because another installation looks similar: roof projection, wall condition and access may change the choice.
A quotation should describe the whole route
Ask where the cable will enter, how it will be supported and where the router will sit. A gable can offer a useful outdoor position while leaving a long route to a study or rear living room. Existing Ethernet may help; additional indoor work should be identified before the appointment.
- Identify rooms that currently have poor coverage.
- Mention mesh equipment, a business router or wired access points.
- Show any recent roof work or external insulation that affects fixings.
- Explain how the working area can be reached safely.
Installation costs and Starlink charges
The labour quotation depends on access, the support arrangement, cabling and agreed network work. Hardware and Starlink subscription charges are separate items. Ask for these to be distinguished so you can compare quotations on the same basis, including any extra access equipment.
Does every Knutsford home need a pole mount?
No. A wall support, pole or another suitable arrangement should be chosen after looking at the property. The photographed job demonstrates one solution. It does not establish which mount or service will suit your address, and no speed result is claimed from the image.
Related installation advice
- Regional coverage and installation planning
- Nearby Mobberley installation example
- What changes an installation quotation
Check customer feedback before booking
Read SpaceTek customer reviews on Google and meet Bob and learn about the installation service. Reviews cover work across our service areas; the project evidence above identifies the location of this example.
Arrange a Starlink installation in Knutsford
Send Bob your postcode, kit model and property photographs or call 07802 410 222. Explain which rooms or buildings need internet so the quotation covers the whole job.
SpaceTek UK is an independent installer. Starlink equipment, subscriptions and service availability are separate from installation labour. Find out about SpaceTek and Bob.