This Starlink installation in Grappenhall, near Warrington, was carried out at a home that the installer describes as having no internet connection. The project pairs an offset dish mount beneath the roofline with a finished cable entry and plans to extend indoor coverage using a Deco mesh system.
See the Grappenhall installation
YouTube loads only when you choose to play and allow its cookies.
Connecting the property from an offset mount
The photograph shows the dish on a grey bracket projecting out from the building beneath a slate roof. In the video, the installer explains that the mounting is secured to timber backing behind the visible surface. This detail is specific to the property and should not be read as approval to fix a dish to decorative fascia alone.
The cable is taken into the house through a covered entry point. The recording also identifies where the router has initially been placed. Seeing these parts together is useful: the outside hardware provides the satellite connection, while indoor equipment placement determines how conveniently that connection reaches the household.
A planned Deco mesh extension
The homeowner’s next step, described in the video, is to add a Deco mesh kit. This is a plan mentioned during the installation, not a completed mesh installation or a measured whole-home coverage result.
A mesh design should start with the rooms that need coverage and the route between them. Record where people work, stream and use smart-home devices, then consider suitable node locations and any available Ethernet wiring. Buying more nodes before deciding where they can communicate with each other can leave the original coverage problem unresolved.
Understanding the reported connection result
The installer reports about 200 Mbps after connecting this property. This is an on-site observation in the project video. Future speeds and results in other rooms can differ, especially before the planned indoor network is completed.
What should a Grappenhall enquiry include?
- Your postcode and photographs of the building and proposed cable entry.
- The Starlink kit you own or are considering.
- The rooms that currently have no connection or poor Wi-Fi.
- Details of any existing Deco units, router or Ethernet sockets.
For the surrounding area, see our Warrington installation and workspace guide. Our installer decision guide explains when professional help is useful.
Will the dish solve every indoor Wi-Fi problem?
The satellite connection and indoor coverage are separate parts of the system. This Grappenhall project illustrates that distinction particularly well: the connection was installed first, with a mesh extension planned for the house.
Discuss your installation with SpaceTek
Send your postcode, kit details and photographs of the property. Request an installation quote or call Bob on 07802 410 222. See our installation service areas and meet SpaceTek UK.
Plan your satellite internet installation
Send your postcode, property type and any known Wi-Fi requirements. SpaceTek UK will review the site information and explain the practical next step.