This Starlink installation in Tarporley uses a cranked pole to carry the dish above the roof edge of a brick building. The project is a useful example of planning a mount on a wall that already contains a downpipe, windows and other equipment.
See the Tarporley installation
YouTube loads only when you choose to play and allow its cookies.
Why the shape of the support matters
The photograph shows two wall brackets supporting the pole beside the downpipe. The pole changes direction near the eaves to position the dish beyond the immediate roof edge. In the video, the installer describes the pole mounting and adaptor used for this job.
The number of fixings mentioned in the recording belongs to this specific installation. It should not be used as a universal fixing schedule: wall condition, mounting hardware and exposure need their own assessment at each building.
Planning around existing wall equipment
A heat-pump unit, an electrical isolator and several cable routes are visible below the dish. Their presence does not prove interference with Starlink, but it does make physical access an important part of the layout. A new installation should allow existing equipment to be serviced and should avoid placing its cable across access panels or controls.
For a similar property, tell us about equipment that needs routine maintenance and any planned replacement work. A mounting position can look convenient in a tight photograph while becoming awkward when the whole wall is considered.
Agreeing where the connection goes indoors
The video follows the cable down the building towards its entry. Before installation, identify the destination room and any network equipment that needs to be connected. This is particularly useful where the most suitable dish position is on a different side of the building from the workspace or main living area.
The narrator mentions the customer’s selected package. No independent long-term speed or reliability record is provided, so this article documents the physical installation rather than promising a performance level.
What should photographs for a Tarporley quote show?
- The whole proposed wall, from ground level to the roof edge.
- Existing equipment, doors, windows, drains and access panels.
- The indoor destination and available power or network points.
- Any obstacles or access restrictions that may affect the work.
Can an older satellite pole be reused?
Only after its condition, mounting, suitability and adaptor compatibility have been assessed. A pole that previously held a different dish is not automatically suitable for the new hardware.
For another Cheshire cable-route example, see our Little Budworth installation guide. Our mounting comparison explains the broader choices.
Discuss your installation with SpaceTek
Send your postcode, kit details and photographs of the property. Request an installation quote or call Bob on 07802 410 222. See our installation service areas and meet SpaceTek UK.
Plan your satellite internet installation
Send your postcode, property type and any known Wi-Fi requirements. SpaceTek UK will review the site information and explain the practical next step.